Avalue EMS-BYT - Manual (Page 43)

Quick Reference Guide
EMS-BYT Series Quick Reference Guide 43
2.12 Installing Hard Disk & Memory, PCI devices (EMS-BYT Series)
Step 1. Remove 6 screws from the bottom of your system.
Step 2. Remove the chassis cover.
Step 1. Remove 5 screws to release the HDD bracket.
Step 2.1 Slide HDD into its bracket until properly seated.
Step 2.2 Secure HDD by means of 5 screws.
Step 3. Slide the DDR3 SODIMM into the memory socket and press it down until properly seated.
Step 4. Insert MPCIE cards into designated locations and fasten with 4 screws to complete MPCIE installation.