Avalue SEAX-H81 - Manual (Page 44)

SEAX-H81 User ’s Manual
44 SEAX-H81 User’s Manual
Item Options Description
SATA Controller(s)
Disabled
Enabled[Default]
Enable or disable SATA Device.
SATA Mode Selection
IDE[Default]
AHCI
RAID
Determines how SATA controller(s) operate.
Port 80h Redirection
LPC Bus[Default]
PCIE Bus
Control where the Port 80h cycles are sent.
3.6.3.2 North Bridge Configuration
Item Options Description
Primary Display
Auto[Default]
IGFX
PEG
PCIE
Select which of IGFX/PEG/PCI
Graphics device should be Primary
Display Or select SG for Switchable
Gfx.
Internal Graphics
Auto[Default]
Disabled
Enabled
Keep IGD enabled based on the setup
options.
GTT Size
1MB
2MB[Default]
Select the GTT Size.
Aperture Size
128MB
256MB[Default]
512MB
Select the Aperture Size.
DVMT Pre-Allocated
[32M] [64M][96M] [128M] [160M]
[192M] [224M] [256M] [Default]
[288M] [320M] [352M] [384M] [416M]
Select DVMT 5.0 Pre-Allocated
(Fixed) Graphics Memory size used by
the Internal Graphics Device.