Avalue SENX-BYT - Manual (Page 10)

SENX-BYT User ’s Manual
10 SENX-BYT User’s Manual
1.5 Specifications
System
CPU
 Intel® Celeron® Processor J1900 (2M Cache, up to 2.42 GHz)
eMMC  Onboard eMMC (BOM Optional 4GB / 8GB /16GB) Default onboard 32GB
BIOS
 AMI uEFI BIOS 64Mbit SPI Flash ROM
I/O Chip  iTE 8772E
System Memory
 1 x 204-pin DDR3L 1333/1600 SODIMMs, Up to 8 GB
Watchdog Timer
 H/W Reset, 1sec. – 65535sec./min.
 1sec. or 1min. step
H/W Status
Monitor
 CPU & system temperature monitoring
 Voltages monitoring
Buzzer
 Buzzer onboard
Expansion
 1 x half size Mini PCI-e supported mSATA
 1 x full size Mini PCI-e supported WiFi or communication module
 1 x SIM Card slot
DIO
 1 x 2 x 3 pin, pitch 2.54 m connector for 4 bit General Purpose I/O
Display
Chipset  Intel® Celeron® SoC integrated Graphics
Resolution
 Dual display : HDMI+ VGA, HDMI+LVDS, VGA+LVDS
 HDMI 1920 x 1080 @ 60Hz
 VGA 2560 x 1600 @ 60 Hz
 Dual channel 18/24 bit LVDS (by Chrontel CH7511B-BF)
Ethernet
Chipset
 1 x Realtek RTL8111G PCI-Express Gigabit Ethernet
Ethernet Interface  10/100/1000 Gigabit Ethernet
Audio
Chipset
 Realtek ALC662 HD Audio Decoding Controller
Audio Interface  Mic-In, Line-out
Audio Amplifier  Realtek ALC105 3W Stereo Class-D Audio amplifier
I/O
Rear Side External
I/O Connector
 1 x RJ-45
 1 x HDMI
 1 x VGA
 2 x USB 2.0
 1 x USB 3.0
 1 x COM port (Pin 9 without power)
 1 x SD card slot support SD/ SDHC Card