Avalue EMX-H61 - Manual (Page 31)

EMX-H61 User ’s Manual
EMX-H61 User ’s Manual 31
3.5.5 Security Setting
• Administrator Password
This option is used to set an administrator password, as the following steps:
1. Move the cursor to the Administrator Password item, press .
2. In the "Create New Password" dialog box, enter 3 to 20 characters or numbers to be
setted, press , and enter again in the "Confirm Password" dialog box to confirm
the password is correct. If the prompt "Invalid Password!" , entering the password does
not match, please enter it again.
To clear the system administrator password, select "Administrator Password", in "Enter
Current Password" dialog box enter the old password, and in the "Create New
Password ", password is cleared.
• User Password
The option be used to set the user password, setting steps is same with "Administrator
Password" Setting way.
Note : Don’t forget your password. If you forget the password, you will have to open the
computer case and clear all information in the CMOS before you can start up the
system. But by doing this, you will have to reset all previously set options.