Avalue EAX-Q67 - Manual (Page 40)

EAX-Q67 User’s Manual
40 EAX-Q67 User’s Manual
1.8.12 Serial ATA II Connector (SATA3 , SATA4 , SATA5, SATA6 )
These connectors support SATA 2.0 and are for the Serial ATA signal cables for Serial ATA
hard disk drives.
SATA3、SATA4、SATA5、SATA6
Connect the right-angle side of SATA signal
cable to SATA device. Or you may connect the
right-angle side of SATA cable to the onboard
SATA port to avoid mechanical conflict with
large graphics cards.
1.8.13 USB connectors (USB56, USB78, USB910, USB1112,)
These connectors are for USB 2.0 ports. Connect the optional USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system chassis.
These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps
connection speed.
USB56, USB78, USB910, USB1112
Never connect a 1394 cable to the USB connectors. Doing so will
damage the motherboard!
The USB module is purchased separately.