Avalue EAX-Q67 - Manual (Page 30)

EAX-Q67 User’s Manual
30 EAX-Q67 User’s Manual
3. Firmly insert the DIMM into the socket until the retaining clips snap back in place and the
DIMM is properly seated.
 A DDR3 DIMM is keyed with a notch so that it fits in only one direction.
DO NOT force a DIMM into a socket to avoid damaging the DIMM.
 The DDR3 DIMM sockets do not support DDR DIMMs. DO NOT install
DDR2 DIMMs to the DDR3 DIMM socket.
Make sure to unplug the power supply before adding or removing DIMMs
or other system components. Failure to do so may cause severe damage
to both the motherboard and the components.
1.5.4 Removing a DIMM
1. Simultaneously press the retaining clips downward to unlock the DIMM.
2. Remove the DIMM from the socket.
Support the DIMM lightly with your fingers when pressing the retaining
clips. The DIMM might get damaged when it flips out with extra force.