Avalue ECM-A50M - Manual (Page 14)

ECM-A50M Quick Installation Guide
14 ECM-A50M Quick Installation Guide
2.3.7 ErP Power saving mode selector (JDEEPS5)
* Default
DEEPS5=0*
DEEPS5=1
Signal PIN
DEEPS5_SEL 1
GND 2
2.3.7.1 ErP Power saving mode selector setting details
Settings Description
DEEPS5=0 System will not enter deep S5 state after AC power on, it remains in normal ACPI S5 state.
DEEPS5=1 System will enter deep S5 state 6 sec after AC power on.