AValon RF DX602 UAV - Manual (Page 14)

AVALON RF, INC. Page 12 of 14
DX602-C1 User’s Guide & Operating Manual
4.6.3 Splitters
When a pair of antennas feeds more than one receiver, it is
convenient to split the signal from each antenna to all receivers at the
same location. Please remember that splitting will in turn reduce the
operating range and therefore not recommended unless a link budget
has the loss accounted for.
Ordering information:
Splitter type
DX602
(SMA-SMA)
1 to 2 (two DX..2) SP2S
1 to 3 (three DX..2) SP3S
1 to 4 (four DX..2) SP3S
1 to 8 (eight DX..2) SP8S
4.6.4 Splitter to receiver cables.
The use of splitters requires jumper cables from every splitter output
to every receiver antenna input. Ordering information for a DX602
receiver system:
Number of
DX602
Receivers
Number
of cables
DX602
2 4 CBLSS-2
3 6 CBLSS-2
4 8 CBLSS-2