AutoPage C3-RS1100 OLED User Manual

Page 5

Aug/2009

C3 RS-1000 OP

While the
TRIGGERED icon
is flashing.

Push the

button to display
triggered area.

While the

Push the

button to see the display

While the

icon is flashing

Push the

button, the c ount
down timer will
display.

Press button 2 to
turn off the count
down time

While the

icon flash

Push the button, the OLED screen will display these icons individually i.e. daily

s tart timer, timer start or temperature start, depend on which you selected. PLEASE

BE SURE YOU FULLY UNDERSTAND THESE FEATURES AND USE EXTREME CAUTION

SO THAT THE VEHICLE IS NOT IN AN ENCLOSED AREA WHILE RUNNING!

While the

icon is

flashing

Push the button, the alert
alarm time will display.

Press button 2 to turn off the
alert alarm timer

D. SELECT THE TRANSCEIVER’S BUTTON CONFIGURATION:

1. Spin up the Switch to select the transceiver button configuration you need and the OLED screen will

display the transceiver button configuration you have selected.

2. Within 5 seconds press buttons 1, 2, 3 or 4 for the remote control “button configuration” you have

selected.

Note: If 5 seconds of inactivity expired, or you push the button, the transceiver button configuration mode

will exit.