The most important spares—overview, Gaskets, Keramott – Austroflamm G1 User Manual
Page 8: Other parts, Accessories, Heating in between seasons, Chimney fire, Maintenance, Cleaning, Important
G1
6
english
Heating in between seasons
Heating the stove in between seasons, when the outside
temperatures are higher, the flue gases may not be able to
escape completely and this may lead to disturbances in
the chimney draught, especially if the temperatures are ris-
ing suddenly. The stove has to be charged with less wood
and the primary air has to be increased so that the wood
can burn down faster (with visible flames) and thus the
chimney flue can stabilize.
Chimney fire
A Chimney fire may occur, due to sooting and deposits in
the chimney, if improper or humid fuel is used. Close all air
inlets on the fireplace/chimney immediately and call the
fire brigade. Please have an expert inspect your chimney
for cracks and air-tightness after the burning out of the
chimney.
4. THE MOST IMPORTANT SPARES—OVERVIEW
Gaskets
Description
Nr. drawing Part number
Flat gasket 8 x 2 x 400 mm
21
710096
Flat gasket 8 x 2 x 81 mm
23
710096
Round gasket d= 10 x 1100 mm
20
710319
Keramott
Description
Nr. drawing Part number
G1 keramott base
3
716213
G1 keramott wood retainer
9
716249
G1 keramott lateral front left
8
716215
G1 keramott lateral rear left
7
716211
G1 keramott rear
4
716214
G1 keramott lateral front right
6
716247
G1 keramott lateral rear right
5
716248
G1 baffle plate
1
716054
G1 vermiculite baffle plate
2
716210
Other parts
Description
Nr. drawing Part number
G1 door glass
22
716063
Stove lacquer
--
650002
Glass cleaner ½ litre
--
640070
Accessories
You can obtain floor plates made of glass or steel, hearth accessories or care products from your certified dealer.
IMPORTANT:
Have defective parts replaced by your certified dealer only. This will guarantee that your stove
functions properly and safely. The fireplace must not be altered.
Maintenance
To clean the glass, please use a specialised product such as Thermohit glass cleaner. Lacquered surfaces are to
be cleaned only with a cloth (may be damp). Special cleaning agents should also be used for stainless steel
surfaces. Only gaskets in good order ensure the proper function of your stove!
Cleaning
The stove, flue outlets and smoke pipes should be cleaned and inspected for deposits every year – if necessary
more often, e.g. after the cleaning of the chimney. The chimney also has to be cleaned regularly by the chim-
neysweeper. Your chimneysweeper will inform you of the necessary inspection intervals. An expert should inspect
the stove annually.
Keramott numbering = order of installation