Care and maintenance, Electrical systems, Cleaning the mower – Dixon RAM 50 User Manual
Page 47: Serial numbers, Warranty, Parts/service
CARE AND MAINTENANCE
47
ELECTRICAL SYSTEMS
Keep all connections clean and tight.
CLEANING THE MOWER
Wash mower periodically. Clean above and below deck.
High pressure washing and alkaline based soaps can cause
damage to bearings and other parts of the mower. After
washing your mower, start the engine and engage the mower
deck for a few minutes to disperse any water that may have
accumulated in bearings, pulleys or fans.
Note:
Allow mower to cool before washing. If bearings are hot,
they will draw moisture inside as they dry and cause
corrosion.
SERIAL NUMBERS
The serial number is located on frame at rear of engine.
WARRANTY
Refer to warranty information (Page 16).
PARTS/SERVICE
See your Dixon dealer for replacement parts, warranty or
service.
This manual is related to the following products: