Dixon RAM 50 - Manual (Page 18)

SPECIFICATIONS
18
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Additional information may be provided elsewhere in this manual.
RAM SERIES™ 50 Model 968999552
1½" square tube side frame
Made of 11 gauge fabricated welded construction
with external reinforcement ribs. Three blades
combine for a 48" (122cm) cut width. Cut height
approximately 1½" (38mm) to 4" (114 mm).
Electric clutch
Each rear wheel is independently driven by a
Hydro Gear ZT2800 hydrostatic drive
7 " cooling
fan.
26 HP Briggs and Stratton engine, overhead
valve, air cooled, gasoline, full pressure lube with
oil filter, vertical shaft, aluminum head and block
with cast-iron cylinder liners.
Electric-key switch operation with safety interlocks
on park brake and blade drive clutch.
Front 11 x 4.5 x 5 smooth tread 15 PSI
(103 kPa)
Rear 18 X 9.5 X 8 Turf pneumatic 15 PSI
(103 kPa)
Fuel 4.9 gallon (19 liters) approximately
Engine Oil 2 qts. (1.8 liters) SAE 10W30
with filter
Width 50" (112 cm)
Height 40" (102 cm)
Length 72" (183 cm)
Weight 605 lbs. (274 kg)
Chassis:
Mower Deck:
Blade Drive:
Drive System:
Engine:
Starting
System:
Tires:
Capacities:
Dimensions: