ANSMANN 5707153 Digispeed 4 Ultra+ - Manual (Page 2)

GB
OperatiNg iNstrUCtiONs
Use Of the Charger
Super-speed-charger for 1-4 NiCd or NiMH batteries of the sizes Micro (AAA) or Mignon (AA); Powered
by 100-240 V AC adaptor
featUres
Separate charging processes for each battery inserted (individual supervision of each cell
position); Faulty cell detection; Automatic start of the charging process once the batteries make
contact regardless of the charging status before insertion; Adjustable charging current via switch;
Microprocessor control of the charging status; –delta V control and safety timer; Temperature safety
cut-off; Safety timer; Trickle charging; Automatic matching of charging current; protection against
reverse polarity; LED charging status indicators for each cell
iNDiCatOrs
> LED red: battery is being fast charged
> LED red flashes : The charging current is cut off. 1. Defective cell (change battery)
2. Disposable battery inserted (remove battery)
> LED green: battery is fully charged. After termination of fast charging the unit switches over to trickle charging.
The cells may be left in the charger until they are needed without being overcharged or losing capacity.
WarNiNg!
Due to the very high Charging current it is very important to charge only Fast rechargeable cells. We
recommend that you use the cells we delivered together with the charger. Only charge either NiMH or
NiCd batteries with the correct switch position. Never mix both battery types. Danger of explosion if
other types of batteries (Alkaline, RAM etc.) are inserted or switch in wrong position.
safety
Keep charger in a dry place (indoor use only). In order to avoid the risk of fire and/or electric shock,
the unit must be protected against high humidity and water. Do not use if there are signs of damage to
the housings, cables or connectors
atteNtiON
Only charge fast rechargeable batteries, which are designed to accept he very high charging currents