AMT Datasouth M7plus - Manual (Page 18)

M7 SERIES
Thermal Printer Service Manua l
48 48
Platen Roller
1. Turn the power off.
2. Rotate the platen roller and
wipe it thoroughly with 100%
ethanol and a cotton swab, or
lint-free cloth.
Clean the platen roller when changing a
new label roll
Tear Bar/Peel
Bar
Use the lint-free cloth with 100%
ethanol to wipe it.
As needed
Sensor Compressed air or vacuum Monthly
Exterior
Wipe it with water-dampened cloth As needed
Interior Brush or vacuum As needed
Note:
Do not touch the print head by hand. If needed, use ethanol to clean it.
Only use 100% Ethanol. DO NOT use medical alcohol, which may damage the printer head.
Clean the print head and supply sensors each time the ribbon is replaced to maintain
performance and extend printer life.