Quick reference guide – Directed Electronics NONE AM5 User Manual

Page 24

Quick reference guide

To arm the system

■ To arm the system, press the

button on your transmitter. When the

system arms, your will hear a short horn honk, see the parking lights
flash once, and the doors will lock.

To disarm the system

■ To disarm the system, press the

button on your transmitter. You will

hear two short horn honks, the parking lights flash twice, and the doors
unlock.

Disarming without a transmitter

■ Turn on the ignition. Press the integrated LED/Valet button the pro-

grammed number of times within 10 seconds. The system should now
disarm. If it does not, you may have waited too long. Turn the ignition
off and on and try again.

To enter or exit Valet Mode

■ Turn ignition to “run” position, then turn to “off” position. Press and

release the integrated LED/Valet button within 10 seconds. The status
LED will light solid if you are entering Valet Mode, and it will go out if
you are exiting Valet Mode.

Remote Valet

■ Open any door. Press the

button on your transmitter. Within one

second, press the

button on your transmitter. Within one second,

press the

button on your transmitter again. The status LED will stay

on if you have entered Valet Mode, and it will go out when exiting Valet

Mode.

Panic Mode

■ To enter Panic mode, press the

button on your transmitter. The horn

will sound and the lights will flash for 30-seconds. To stop panic mode
press the

, or

button on your transmitter.

Cut along dotted line and f

old f

r a quick and eas

efer

ence to k

eep in y

our pur

se or w

allet.

✂✂

✂ ✂