Reboot the receiver – Altech UEC DT 3900 User Manual
Page 13
13
4.3 Connect the antenna
Connect the antenna lead to the ANTENNA IN connection on the rear of the
Set Top Box.
3.4 Connect the power
3.4.1 Plug the power lead of the receiver into the mains.
3.4.2 Connect the power to your monitor.
3.4.3 Link the power to the amplifier; you are now ready to get started.
REBOOT THE RECEIVER
Resetting to factory default can be useful if you have change some settings
and lost some functions. Resetting takes the receiver back to its original
configuration and you will lose all personalized functions (favorites,
parental lock, etc…). To avoid resetting the receiver accidentally, you are
required to enter a PIN CODE to authorize reset as follows:
• Menu / Settings / Factory Reset
• Press the red button to confirm.
• Enter your PIN CODE (4 digits – factory code is 0000).
• Wait a few seconds