ADLINK IMX-9000 User Manual
Page 17
IMX-9000 User's Manual
17
3
Turn the IMX-9000 on for the first time
After you have initially charged your device for about 4 hours, the device is ready to be used.
You can now start up your device where you will calibrate the display, learn some basic stylus
usage and setup the system time and date.
3.1 Recalibrate the IMX-9000 screen
The calibrate screen can be activated by tap
.Start
Settings
Control Panel. Then
double-tap Stylus. Tap the Calibration tab and tap Recalibrate.
1. Tap the Center cross with the stylus.
2. The cross moves to the next location.
Continue tapping the cross until the screen
has been calibrated.
3. After calibration is finished, press the
Enter key the save the setting.
Power Key