ADLINK MXE-1300 Series - Manual (Page 47)

Getting Started 35
MXE-1300
2.5 Wall-mounting the MXE-1300
The MXE-1300 is shipped with a VESA 100 wall-mount brackets
and accessory screws. The bracket has four M4 mounting holes
with a pitch of 100 mm, allowing fixture to any VESA 100 compati-
ble mounting mechanism. The mounting bracket enables the
MXE-1300 series controller to be mounted on a wall or the back of
a monitor. To wall-mount the MXE-1300:
1. Prepare the wall-mount brackets and 4 M4 screws pro-
vided.