ADLINK cPCI-8301 - Manual (Page 16)

8 Connectors
Note: For pins 11, 14 and 16 of Jn2, BUSMODE is set to
capable of performing PCI protocol:
39 GND LOCK# 40 39 PERR# GND 40
41 NC NC 42 41 +3.3V SERR# 42
43 PAR GND 44 43 C/BE[1]# GND 44
45 V(I/O) AD[15] 46 45 AD[14] AD[13] 46
47 AD[12] AD[11] 48 47 M66EN AD[10] 48
49 AD[09] +5V 50 49 AD[08] +3.3V 50
51 GND C/BE[0]# 52 51 AD[07] NC 52
53 AD[06] AD[05] 54 53 +3.3V NC 54
55 AD[04] GND 56 55 PMC-RSVD1 GND 56
57 V(I/O) AD[03] 58 57 PMC-RSVD2 PMC-RSVD3 58
59 AD[02] AD[01] 60 59 GND PMC-RSVD4 60
61 AD[00] +5V 62 61 ACK64# +3.3V 62
63 GND REQ64# 64 63 GND NC 64
BUSMODE[4:2]#
L L H
Jn3 (64 Bit)
Pin Signal Signal Pin
1 NC GND 2
3 GND C/BE[7]# 4
5 C/BE[6]# C/BE[5]# 6
7 C/BE[4]# GND 8
9 V(I/O) PAR64 10
11 AD[63] AD[62] 12
13 AD[61] GND 14
15 GND AD[60] 16
Table 2-2: P3 PMC Connector Pin Definitions
Jn1 (32 Bit) Jn2 (32Bit)
Pin Signal Signal Pin Pin Signal Signal Pin
Table 2-1: P1 and P2 PMC Connector Pin Definitions