ADLINK cPCI-6620 - Manual (Page 43)

Drivers & Utilities 31
cPCI-6620
6 Drivers & Utilities
The cPCI-6620 drivers can be found on the ADLINK All-In-One
DVD at X:\cPCI\cPCI-6620\ or from the ADLINK website
(http://www.adlinktech.com). ADLINK provides validated driv-
ers for Windows XP Professional and Windows 7. We recommend
using these drivers to ensure compatibility.
6.1 Driver Installation Procedure
The following describes the driver installation procedures for Win-
dows XP.
1. Install the Windows operating system before installing any
driver. Most standard I/O device drivers are installed during
Windows installation.
2. Install the chipset driver by extracting and running the pro-
gram in ...\Chipset\Intel_Chipset_Device_Software
_AllOS_9.2.0.1015.zip.
3. Install the Microsoft .NET Framework utilities (required for the
graphics utility) by extracting and running the program in
...\Chipset\Microsoft_Net_Framework_v3.5_SP1.zip.
4. Install the graphics driver and utilities by extracting and run-
ning the program in ...\Graphics\Intel_HD_Graphics
_Family_WinXP_6.14.10.5313.zip.
5. Install the LAN drivers by extracting and running the program
in …\LAN\Intel_82574L_Gigabit_Network_WINXP
_11.4.7.0.zip.
NOTE: NOTE:
In order to enable AHCI mode, you must pre-install the
Intel® Rapid Storage Technology driver using the F6 instal-
lation method described in the file F6Readme.txt, located
here: …\AHCI\Intel RST Driver Files_F6 Install_
32bit_10.1.0.1008.zip (not required for Windows 7).