ADLINK cPCI-3620 - Manual (Page 21)

Specifications 9
cPCI-3620
1. The storage device limits the operational vibration tolerance. When
the application requires higher specification for anti-vibration, it is
recommended to use a flash storage device.
2. ADLINK-certified thermal design. The thermal performance is depen-
dent on the chassis cooling design. Sufficient forced air-flow is required.
Temperature limits of optional mass storage devices may also affect the
thermal specification.
2.2 cPCI-R3610(T) RTM Specifications
Table 2-2: cPCI-R3610(T) RTM Specifications
Mechanical
Board Size
• cPCI-R3610: 100mm x 50mm
• cPCI-R3610T: 100mm x 80mm
Dual-slot (8HP, 40.64mm)
(optional single slot upon request )
Gigabit
Ethernet
• Two GbE ports switched from cPCI-3620
Graphics
• VGA switched from cPCI-3620
Serial Ports
• Two serial ports on I/O panel from pin header
Storage
Interfaces
• One 7-pin Serial ATA port (SATA1 signal switched from
cPCI-3620 by BIOS
Faceplate I/O
• 1x USB 2.0 ports
• 2x 10/100/1000BASE-T Ethernet ports
• Analog DB-15 VGA port
• 2x COM ports
NOTE: NOTE:
Specifications are subject to change without prior notice.