ADLINK PCIS-8580-13S - Manual (Page 18)

10 Installation
Figure 2-2: Installing the driver for PCI expansion card
3. While setup finishes, please reboot your system. (Note:
According to different hardware configuration, you may
need to reboot your computer for several times to detect
the StarFabric serialized bridge and its subsequent PCI
devices.)
Install your PCI Card into the Expansion Chassis
The PCIS-8580 expansion chassis can accommodate 4 additional
PCI slots (PCIS-8580-4S) or 13 additional PCI slots (PCIS-8580-
13S). This section illustrates the procedures to install your PCI
cards into the expansion chassis.
1. Open the expansion chassis by loosen the screws and
remove the top cover of the chassis. You’ll see a back-
plane inside the chassis.