ADLINK ND-6050 - Manual (Page 72)

64 • Command Set
3.4 Read Configuration
( 6050, 6052, 6053, 6054,
6056, 6058, 6060, 6063 )
@Description
Read the configuration of module on a specified address ID.
@Syntax
$(Addr)2
$ Command leading code
(Addr) Address ID.
2 Command code for reading configuration
@Response
!(Addr)(TypeCode)(BaudRate)(CheckSumFalg)
or
?(Addr)
! Command is valid.
? Command is invalid.
(Addr) Address ID.
(TypeCode) It always be 40 (Hex) for digital I/O modules.
(BaudRate)
Current setting of communication baud rate,
refer to Table 3-1 for details.
(CheckSumFlag)
Current setting of check-sum flag, refer to Table
3-3. for details.