Hyundai H-CDM8018 - Manual (Page 22)

22
Securing the speakers
• Position the speaker into the mounting hole and re-confirm the correct mounting location and hole placement.
• Screw clips are provided to ensure a snug fit. These should be placed over the metal surface and line up the hole you have
previously drilled with the screw clip. Place the speaker into the hole, align the holes and proceed to insert the screws. Be sure to
tighten the screws evenly so that it will not warp the speaker frame.
• Turn your system back on and confirm the speakers operation first at a low volume and
then you may increase the volume as you desire.
• After installation acoustic system and having tested it the speaker grille will have to be
inserted. Turn on you system and follow these steps carefully:
- locate the speaker grille;
- now carefully inspect the place where the speaker grille will be mounted – there should be
no blowholes;
- fix the speaker grille by screws.