Hyundai H-CDM8018 - Manual (Page 21)

21
Mounting the speakers
Installation kits are available from your dealer or local stereo shop to help make your installation easy. These kits also give
your installation a clean, custom appearance. Questions about installations methods please consult a professional auto
sound dealer/installer for assistance.
• Choose the place of installation for acoustic system. For most acoustic system stipulated regular places in the automobile
approach. In this case you need to know only assembly depth. Before installation acoustic system check up their assembly
depth.
• At a choice of a non-standard arrangement of columns at which it is necessary to cut them in panels of the automobile, use a
mould (not included). For achievement of ideal arrangement of acoustic system keep up geometry of a mould, as it is very
important for correct installation of your system (А=В=115 mm, ØС=5 mm).
• If it will be necessary to cut steel, reinstall the cosmetic panel in place and use the hole you have previously cut as a template.
This will help to insure proper cutting and a good fit. Now, mark the locations for the speakers mounting screws, remove the
panel and drill the screw holes. When finished you may replace the panel.
• After cutting and drilling all holes, inspect the mounting areas for any metal burrs or rough edges. File any area that may
interfere with the mounting of the speaker.
• Clean any metal shavings from the mounting area and check for areas in which water may enter the speaker cavity. Treat the
area for water protection when necessary.