Acrosser AR-B1740 - Manual (Page 29)

PC Health Status
Video Off Option
Controls what causes the display to be switched off
Suspend -> Off Always On All Mode -> Off
Video Off In Suspend
Controls what causes the display to be switched off
Suspend -> Off Always On All Mode -> Off
Suspend Type
S1 (POS) Power On suspend
All devices are powered up except for the clock synthesizer. The Host and PCI clocks are
inactive and PIIX4 provides control signals and 32-kHz Suspend Clock (SUSCLK) to allow for
DRAM refresh and to turn off the clock synthesizer. The only power consumed in the system
is due to DRAM Refresh and leakage current of the powered devices. When the system
resumes from POS, PIIX4 can optionally resume without resetting the system, can reset the
processor only, or can reset the entire system. When no reset is performed, PIIX4 only needs
to wait for the clock synthesizer and processor PLLs to lock before the system is resumed.
This takes typically 20 ms.
S3 (STR) Suspend To RAM
Power is removed from most of the system components during STR, except the DRAM.
Power is supplied to Suspend Refresh logic in the Host Controller, and RTC and Suspend Well
logic in PIIX4. PIIX4 provides control signals and 32-kHz Suspend Clock (SUSCLK) to allow for
DRAM refresh and to turn off the clock synthesizer and other power planes.
Modem Use IRQ
Name the interrupt request (IRQ) assigned to the modem (if any) on your system. Activity of
the selected IRQ always awakens the system.
Primary IDE 0/1
Select "Disabled" to turn off Primary IDE.
Secondary IDE 0/1
Select "Disabled" to turn off Secondary IDE.
FDD,COM,LPT Port
Select "Disabled" to turn off these I/O.
PCI PIRQ[A-Q]#
Enabled or Disabled PCI,PIRQ[A-D]#IRQ status.
This section describes CPU temperare for the system.
Shutdown Temperature
This item allows you to set up the CPU shutdown Temperature. This item only effective
under windows 98 ACPI mode.
System Temperature
This field displays the current system temperature.
CPU Temperature
These fields display the current CPU temperature, if your computer contains a monitoring
system.
Vcore
These fields display the current voltage of up to seven voltage input lines, if your computer
contiains a monitoring system.
VTT
One type of CPU voltage
+3.3V, +5V, +12V
Show you the voltage of +3.3V, +5V, +12V
CPUFAN Speed
These fields display the current speed of up to three CPU fans, if your computer contains a
monitoring system.
System FAN Speed
Show you the current SystemFAN operating speed
AR-B1740 User's Manual 2 9