Acrosser AR-B5230 - Manual (Page 24)

AR-B5230 Series User’s Manual
24/25
Type the password, up to eight
characters in length, and press
. The password typed now will
clear any previous password from the
CMOS memory. You will be asked to
confirm the password. Type the
password again and press .
You may also press to abort the
selection and not enter a password.
To disable a password, just press
when you are prompted to
enter the password. A message will
confirm that the password will be
disabled. Once the password is
disabled, the system will boot and you
can enter Setup freely.