Acrosser AR-B5230 - Manual (Page 19)

AR-B5230 Series User’s Manual
19/25
3.4 PnP/PCI setup
Option Choice Description
Reset Configuration
Data
Enabled
Disabled
Normally, you leave this field Disabled. Select Enabled
to reset Extended System Configuration Data (ESCD)
when you exit Setup. If you have installed a new add-on
and the system reconfiguration has caused such a
serious conflict, then the operating system can not boot.
Resources
Controlled By
Auto(ESCD)
Manual
The Award Plug and Play BIOS has the capacity to
automatically configure all of the boot and Plug and Play
compatible devices. However, this capability means
absolutely nothing unless you are using a Plug and Play
operating system such as Windows 95. If you set this
field to “manual,” then you may choose specific
resources by going into each of the submenus.
IRQ Resources N/A
When resources are controlled manually, assign a type
to each system interrupt,depending on the type of the
device that uses the interrupt