Acrosser AR-B1631ET - Manual (Page 19)

AR-B1631ET User’s Guide
19/30
4.4 PnP/PCI
PnP/PCI
Reset Configuration Data [Disable]
Normally, you leave this field Disabled. Select Enabled to reset the Extended System Configuration
Data (ESCD) when you exit the Setup if you have installed a new add-on and the system
reconfiguration has caused such a serious conflict that the operating system cannot boot.
Resources Controlled By [Auto (ESCD)]
This field sets control over the IRQ resources by the automatic (ESCD) system or manual assignment
of IRQ channels. The default enables the automatic (ESCD) control. Configuration options: [Auto
(ESCD)] [Manual].
4.5 PERIPHERALS
Peripherals