Acrosser AR-B1661 - Manual (Page 31)

AR-B1661 Manual
30
3.8 PNP/PCI CONFIGURATION
This option configures the PCI bus system. All PCI bus systems on the system use INT#, thus all installed PCI
cards must be set to this value.
Phoenix-Award BIOS CMOS Setup Utility
PNP/PCI Configuration
PNP OS Installed : No Used MEM base addr : N/A
Resources Controlled by : Manual
Reset Configuration Data : Disabled
IRQ-3 assigned to : Legacy ISA
IRQ-4 assigned to : Legacy ISA
IRQ-5 assigned to : PCI/ISA PnP
IRQ-7 assigned to : Legacy ISA
IRQ-9 assigned to : PCI/ISA PnP
IRQ-10 assigned to : PCI/ISA PnP
IRQ-11 assigned to : PCI/ISA PnP
IRQ-12 assigned to : PCI/ISA PnP
IRQ-14 assigned to : PCI/ISA PnP
IRQ-15 assigned to : PCI/ISA PnP
DMA-0 assigned to : PCI/ISA PnP
DMA-1 assigned to : PCI/ISA PnP ESC : Quit $ % ' : Select Item
DMA-3 assigned to : PCI/ISA PnP F1 : Help PU/PD/+/- : Modify
DMA-5 assigned to : PCI/ISA PnP F5 : Old Values (Shift) F2 : Color
DMA-6 assigned to : PCI/ISA PnP F6 : Load BIOS Defaults
DMA-7 assigned to : PCI/ISA PnP F7 : Load Setup Defaults
PNP OS Installed
This field allows you to specify if the operating system installed in your system is plug and play aware.
NOTE: Operating systems such as DOS, OS/2, and Windows 3.x do not use PnP
Reset Configuration Data
This field allows you to determine whether or not to reset the configuration data. The default value is Disabled.
Resources Controlled by
This PnP BIOS can configure all of the boot and compatible devices automatically. However, this capability
needs you to use a PnP operating system such as Windows 95. The default value is Manual.
IRQ3/4/5/7/9/10/11/12/14/15, DMA0/1/3/5/6/7 assigned to
These fields allow you to determine the IRQ/DMA assigned to the ISA bus and is not available to any PCI slot.
PCI /VGA Palette Snoop