Acrosser AR-B1651 - Manual (Page 20)

AR-B1651 User’s Guide
20
PNP OS Installed [NO]
Select Yes if the system operating environment is Plug-and-Play aware (e.g., Windows 95).
Swap Floppy Drive [Disabled]
This field is effective only in systems with two floppy drives. Selecting Enabled assigns physical drive B to
logical drive A, and physical drive A to logical drive B.
USB Keybord Support [Disable]
SUPPORT USB KEYBORD
INIT Display First [PCI SLOT]
Initialize the PCI video display before initializing any other display device on the system.
Thus the PCI display becomes the primary display.
Frame Buffer Size [8M]
ACPI Function [Disable]
This item allows you to Enabled/Disabled the Advanced Configuration and Power Management (ACPI). The settings are
Enabled and Disabled .
5.3 PERIPHERALS
Peripherals
Onboard Serial Port 1 [AUTO]
Choose serial port 1 & 2's I/O address. Do not set port 1 & 2 to the same
address except for Disabled orAuto.
Onboard Serial Port 2 [Auto]
Choose serial port 1 & 2's I/O address. Do not set port 1 & 2 to the same
address except for Disabled orAuto.