Acrosser AR-B104D - Manual (Page 6)

AR-B104D Quick Manual
P/N：220010396-G 6
B. Digital Logic
i. Logic High: 3V to 28V
ii. Logic Low: 0V to 1.5V
9. Maximum input frequency 10KHz( duty =
50% ).
Counter 1. All digital input support counter mode
2. 12 x independent 16-bit counters
3. Connect to all digital inputs
4. Operation Mode:
a. Count to number interrupt.
b. Read and clear
c. Read on the fly
d. Auto stop counting after programmable
constant state interval(Interrupt active
after programmable constant state
interval Resolution: 1ms, and 100ms)
Digital Output 1. 12 channels
2. Output Type: Open drain MOSFET driver
3. Output voltage range: 5V to 30V
4. Sink Current: maximum 500mA each channel
5. Power on initial state: MOSFET off
6. Support pulse generator
A. Programmable cycle time, duty cycle and
number of cycles. User defines on and off
periods (maximum 8-bit for on and off
period value).
B. Maximum 65535 cycles
C. RUN & STOP command
D. Programmable time unit: 1 ms, 100ms
and 1 second
Timer 1. 12 x independent 16-bit timers
2. Support Time Out Interrupt
3. Programmable time unit: 1 ms and 100ms
CAN bus 1. 1 x CAN bus
2. 2KV isolation
3. Support both CAN 2.0A and 2.0B protocol
4. Programmable baud rate: from 5K bps
Maximum 1M bps or user-defined baud rate
5. Time stamp of CAN message