Acrosser AR-B1550 - Manual (Page 30)

AR-B1550 User s Guide
28
5.5 PNP/PCI CONFIGURATION
ROM PCI/ISA BIOS (2A434AVF)
PNP/PCI CONFIGURATION
AWARD SOFTWARE, INC.
PCI IRQ Actived By
: Level
Esc: Quit
F1: Help
F5: Old Values : Select Item
PU/PD/+/ -: Modify
(Shift) F2: Color
PNP OS Installed
Resources Controlled By
Reset Configuration Rate
: NO
: Auto
: Disabled
F6: Load BIOS Defaults
F7: Load Setup Defaults
PNP/PCI CONFIGURATION
PNP OS Installed
This item is to choose whether or not installing the PNP(Plug & Play) operation system.
Resources Controlled By
The available choices are &. To choose the resources will be under the control of
system automatically. If chosen , the following items will be listed.
Setting these items one by one will clear up the conflict between NON-PNP
ISA extension cards and PNP system.
These items are used for the PNP ISA(PCI) cards or NON-PNP old ISA cards which use
DMA channel to enable them work normally.
Reset Configuration Data
This item is used to the function of Reset Configuration Data or not.
PCI IRQ Actived By
This item is to determine the active mode.
5.6 LOAD DEFAULT SETTING
This section permits the user to select a group of settings for all BIOS Setup options. Not only can you use these
items to quickly set system configuration parameters, you can choose a group of settings that have a better chance
of working when the system is having configuration related problems.
5.6.1 Load BIOS Defaults
User can load the optimal default settings for the BIOS. The uses best-case values
that should optimize system performance. If CMOS RAM is corrupted, the optimal settings are loaded
automatically.
Load high performance settings (Y/N)?
5.6.2 Load Setup Defaults
User can load the Setup option settings by selecting the Fail-Safe item from the
Default section of the BIOS Setup main menu.
The Fail-Safe settings provide far from optimal system performance, but are the most stable settings. Use this
option as a diagnostic aid if the system is behaving erratically.
Load failsafe settings (Y/N)?