Acrosser AR-B1550 - Manual (Page 31)

AR-B1550 User s Guide
29
5.5 POWER MANAGEMENT
This section is designed to configure peripheral features.
ROM PCI/ISA BIOS (2A434AVA)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
IRQ1 (KeyBoard)
IRQ3 (COM 2)
IRQ4 (COM 1)
IRQ5 (LPT 2)
IRQ6 (Floppy Disk)
IRQ7 (LPT 1)
IRQ9 (IRQ2 Redir)
IRQ10 (Reserved)
IRQ11 (Reserved)
IRQ12 (PS/2 Mouse)
IRQ13 (Coprocessor)
IRQ14 (Hard Disk)
IRQ15 (Reserved)
: NO
: OFF
: OFF
: OFF
: OFF
: OFF
: OFF
: OFF
: OFF
: OFF
: OFF
: OFF
: OFF
Esc: Quit
F1: Help
F5: Old Values ??? ? : Select Item
PU/PD/+/-: Modify
(Shift) F2: Change Color
Power Management
** PM Timers **
Doze Mode
Standby Mode
HDD Power Down
MODEM Use IRQ
Throttle Duty Cycle
: Disabled
: Disabled
: Disabled
: Disabled
: NA
: 33.3%
F6: Load BIOS Defaults
F7: Load Setup Defaults
Figure 6-5 BIOS: Peripheral Setup
Power Management
The option determines how much power consumption is needed for the system after selecting the below items.
Doze Mode
Defines the continuous idle time before the system enters Doze Mode.
Standby Mode
Defines the continuous idle time before the system enters Standby Mode. If any item defined is enabled & active
Standby timer will be reloaded.
HDD Power Down
This option specifies the power management states that the hard disk drive enters after the specified period of display
inactivity has expired.
IRQ
These options enable event monitoring. When the computer is in a power saving mode, activity on the named interrupt
request line is monitored by BIOS. When any activity occurs, the computer enters Full On mode.