Acrosser AR-R5700 - Manual (Page 5)

5
2. Procedure of Assembly/Disassembly
2-1 Installing the 2.5”/3.5”Hard Disk Drive (HDD)
The following are step-by-step installation.
1. Remove the AC-power via un-plug the power cord of AR-R5700.
2. Unlock the two screw-nuts on top-edge to remove the top-cover out from
AR-R5700, as Fig-01.
Fig. 01 Remove the top cover
3. Insert the rubbers into the HDD bracket in four edges.
4. Place HDD body into the HDD bracket and lock HDD and Bracket
together by screws (4pcs), as Fig-02.
Fig-02 HDD bracket with HDD body