Acrosser AR-R5800 - Manual (Page 24)

Revision: 1.2
1.1 Specifications
CPU: a LGA775 socket for Intel Core2 Processors in the 775-Land LGA package.
DMA channels: 7.
Interrupt levels: 16 (24 APIC interrupts).
Chipset: Intel G41 express chipset 82G41 + 82801GR + W83627DHG-P.
Memory: provides two 240-pin DIMM sockets to support DDRIII 1066 non-ECC DIMM.
The
memory capability can up to 2GB.
VGA Controller: G41 GMCH integrated.
Analog Display Interface: 10-pin box header, and resolution up to 2048x1536@75Hz.
Serial ATA Interface: supports Two SATA devices, and data transfer rates up to
300MB/s per device.
Compact flash interface: supports TYPE-II compact flash card with UDMA supported.
USB2.0 interface: one stacked USB connector and two 10-pin pin header to support Six
USB2.0 compatible devices. All resettable fuses protected.
Ethernet interface: on-board six PCI express gigabit Ethernet controllers and two PCI gigabit
Ethernet controllers to support eight LAN ports. They provide a standard IEEE 802.3 Ethernet
interface for
1000BASE-T, 100BASE-TX, and 10BASE-T applications (802.3, 802.3u, and 802.3ab,
respectively).
BYPASS function: supports by ports LAN1 & LAN2 , LAN3 & LAN4 software
programmable.
PCIE X8 interface: One PCI Express x8 slot.
Serial ports (RS232): One high-speed 16550 compatible UARTs ports with 16-byte
send/receive FIFOs.
COM1: RJ45 connector.
LCM interface: a 7-pin pin header could be used to LCM for chassis’ control panel.
General Purpose Input/Output: 8-bit, 3.3V TTL level, bidirectional, and software
programmable GPIOs.
WATCHDOG: software programmable 1~255 second(s) / minute(s).
Power Consumption:
+12V [5.3A], +5V [3.5A], +3.3V [1.8A], -12V [0.9A], +5Vsb
[0.8A] typically.
Test equipments list as below:
Main board: AR-B5800.
Processor: Intel Pentium Processor E6500 2.93GHz / FSB1066
/ 2MB L2 cache / 45nm.
24