Acrosser AR-R5800 - Manual (Page 15)

AR-B5800 User Manual
15
21,22. SATA2, SATA1 (SATA device
connector #2 and #1).
23. VGA1 (2x5pin 2mm Wafer).
To connect SATA device:
1.Attach either end of the signal cable
to the SATA connector on
motherboard.
Attach the other end to the SATA
device.
2. Attach the SATA power cable to the
SATA device and connect the other
end
from the power supply.
VGA Wafer CONNECTOR .
24. ATX12V1. (ATX12V Power Input) 25. SYSFAN3 (System FAN connector 3).
PIN SIGNAL
1 GND
2 +12V
3 Fan speed data
26. CPUFAN1 (CPU FAN connector).
27. SYS_FAN2 (System FAN connector
2).
ON/OFF controlled by CPU
temperature setting of BIOS.
PIN SIGNAL
1 GND
2 +12V
3 Fan speed data
4
CPU FAN PWM
Control
PIN SIGNAL
1 GND
2 +12V
3 Fan speed data