Acrosser ANR-IB75N1/A/B - Manual (Page 43)

Option Choice Description
Terminal Type
VT100 / VT100+ /
VT-UTF8 / ANSI
Emulation: ANSI: Extended ASCII char set. VT100: ASCII
char set. VT100+: Extends VT100 to support color, function
keys, etc. VT-UTF8: Uses UTF8 encoding to map Unicode
chars onto 1 or more
Bits per second
9600 / 19200 /
38400 / 57600 /
115200
Selects serial port transmission speed. The speed must be
matched on the other side. Long or noisy lines may require
lower speeds.
Data Bits 7 / 8 Data Bits
Parity
None / Even / Odd /
Mark / Space
A parity bit can be sent with the data bits to detect some
transmission errors. Even: parity bit is 0 if the num of 1's in
the data bits is even. Odd: parity bit is 0 if num of 1's in the
data
Stop Bits 1 / 2
Stop bits indicate the end of a serial data packet. (A start bit
indicates the standard setting is 1 stop bit. Communication
with slow devices may require more than 1
Flow Control
None / Hardware
RTS/CTS
Flow control can prevent data loss from buffer overflow.
When sending data, if the receiving buffers are full, a 'stop'
signal can be sent to stop the data flow.
43