Acrosser AR-B6051 - Manual (Page 19)

3.3 Security Setup
Supervisor Password
is
N/A
The BIOS attempts to load the operating system from the
devices in the sequence selected in these items.
Set Supervisor
Password
Pressing on
this item for
confirmation:
ENTER
PASSWORD:
When a password has been enabled, you will be prompted
to enter your password every time you try to enter Setup.
This prevents unauthorized persons from changing any
part of your system configuration.
Type the password, up to eight characters in length, and
press . The password typed now will clear any
previous password from the CMOS memory. You will be
asked to confirm the password. Type the password again
and press . You may also press to abort the
selection and not enter a password.
To disable a password, just press when you are
prompted to enter the password. A message will confirm
that the password will be disabled. Once the password is
disabled, the system will boot and you can enter Setup
freely.
19