Dodge 2004 Stratus Coupe - Manual (Page 81)

Installation
1. Open the gap a little between the seat cushion (A) and
the seatback (B) with your hand to locate the lower
anchorages (C).
2. Push the child restraint system’s connectors into the
lower anchorages (C) in accordance with the instructions
provided by the child restraint system’s manufacturer.
3. If your child restraint system requires the use of a top
tether strap, refer to ‘‘Tether anchors for child restraint
systems’’ on page 85.
4. Push and pull the child restraint system in all direc-
tions to be sure it is firmly secured.
NOTE :
• For a new child restraint system that complies with
Federal Motor Vehicle Safety Standard 213, it is not
necessary to secure the child restraint system using the
vehicle’s seat belt.
G18D0240
SEATS, SEAT BELTS, CHILD RESTRAINTS AND AIR BAGS 81
3