Dodge 2004 Stratus Coupe - Manual (Page 276)

CAUTION!
Never apply oil to either wheel bolts or nuts as it can
cause them to overtighten.
NOTE : Flange nuts can be temporarily used on the steel
wheel, but return to the original wheel and tire as soon as
possible.
If all four wheels are changed to steel wheels, use
tapered nuts.
11. Lower the vehicle slowly and then tighten the nuts in
the sequence shown in the illustration until each nut has
been tightened to the specified torque.
88 to 108 N
•
m (65 to 80 ft lb)
N24A0220
276 EMERGENCIES