Directed Electronics 991 - Manual (Page 38)

38 © 2008 Directed Electronics. All rights reserved.
Remote start display: Clock, temperature or runtime •
Allows you to choose what is displayed in the text during the remote start
sequence. Clock displays the current time during remote start.
Temperature displays the current cabin temperature during the remote start.
Runtime displays the runtime remaining during the remote start.
Low Runtime Alert •
The remote reports with one short beep followed by 1 short error tone
(repeated twice) and the text area displays “run time” when the remote
start runtime is at the 3-minutes remaining and one more time at 1 minute
remaining. You have the option to let the remote start timeout or use the
“runtime reset” feature . When programmed “Off” you will not receive a
low runtime alert on the remote.
Car 2 On or Off/Home •
Turns Off or On, 2 car operation from the remote. The option for “home”
is not available.
Backlight Color Off/1 - 8 •
Turn Off the LCD backlighting or changes the color of the backlighting.
Color options include: Blue, green, red, aqua, purple, lime, clear
Temperature Units F and C •
Display temperature in Fahrenheit or Celsius
Button Press Beep On or Off •
Turn Off beeps when a button on the remote is pressed
System Type Remote Start & Security or Remote Start •
Select the type of system you are using, security system with remote start
or a keyless entry system with remote start (to ensure that the correct icons
are displayed on the LCD)
Clock Set •
To enter clock set mode, Press the
AUX
button. The LC text display reads
“hour” to confirm entry in the clock set menu.
Press the AUX button to move up the menu, press the AUX button to move