beautypg.com

Installation – Dynex DX-H720P User Manual

Page 8

background image

Installation

This USB Hub is a plug and play device. Your
computer will display the “Add New Hardware”
Wizard after connecting the hub to your computer.

1) Connect the A-B cable (included in this

package) to the Upstream port on the USB
Hub, then connect the other end of the cable to
an unused USB port on your computer.

2) Connect your USB devices to the Downstream

ports on the USB Hub.

Installation may be done whether your computer is
powered on or off. It is not necessary to restart
your computer after installation.

if additional power is required for connected USB
devices, plug the DC power adapter into the power
jack, then plug the power adapter into a wall outlet

Please use this USB Hub under Self Powered
Mode..

Self-Powering the Hub:

Note:

6