Denso CLASSIC PLUS 26 - Manual (Page 24)

18
TECHNICAL SPECIFICATIONS
MODEL
ITEM/FEATURES Classic Plus 14 Classic Plus 26
Rating Conditions
dry bulb 95 o F (35 o C) 95 o F (35 o C)
wet bulb 83 o F (28.3 o C) 83 o F (28.3 o C)
humidity (60%) (60%)
Specifications
power frequency 60Hz 60Hz
line voltage, single phase 115 V 208/230V
power consumption 1.41 Kw 3.37/3.24 Kw
current consumption 12.3 Amps 16.8/14.6 Amps
power factor 95% 97%
starting current 32A 62A
power cord 14 (3-core) AWG 12 (3-core) AWG
Cooling Unit
cooling capability 3,300 Kcal/hr 6,500 Kcal/hr
13,200 BTU/hr 26,000 Btu/hr
cooling system direct expansion direct expansion
Blower
type of fan centrifugal fan centrifugal fan
air volume: Evaporator (high speed) 470 ft 3 /min;798 m 3 /h 708 ft 3 /min; 1202 m 3 /h
Condenser (high speed) 882 ft 3 /min;1498 m 3 /h 1680 ft 3 /min; 2853 m 3 /h
motor output: (high speed) 0.24 Kw .59/.63 Kw
(low speed) 0.19 Kw .54/.56 Kw
Compressor
type rotary hermetic scroll
output 0.8 Kw 1.6kw
refrigerant type R-22 R-22
refrigerant capacity 1.50 lbs (0.68 kg) 1.87 lbs. (0.85 kg)
Safety Devices
compressor overload protector included included
fan motor protector included included
anti-freezing thermistor included included
full drain tank switch included included
automatic restart (power interruption) included included
compressor time delay program included included
Dimensions & Weight
W x D x H (in.) 19.4 x 26.5 x 41.5 19.4 x 28.7 x 47.2
W x D x H (mm) 492 x 673 x 1054 492 x 730 x 1200
weight (lbs/kg) 165/75 235/107
Operating Conditions
inlet air (relative humidity) 113 o F (45 o C), < 50% 113 o F (45 o C), < 50%
70 o F (21.1 o C), > 50% 70 o F (21.1 o C), > 50%
Control Device
temperature control included included
two speed fan included included