DSC FM-3000 - Manual (Page 3)

Connection Diagram, 7" VX2
WHT
GREEN
YELLOW
RED NMEA In RCA Jack - White wire from Plotter
to Center Conductor (+) and Shield wire from
plotter to Outer (-)
000-144-418 Cable to
data 3
White NMEA OUT RCA Jack - Yello w wire from
Plotter to Center Conductor (+) and Green wire
from plotter to outer (-)
Use Optional 000-144-418 Cable to
connect the VX2 to the RCA type
connectors on the back of the FM-3000.
Set the VX2's NMEA port to output
RMC and GGA.
SHIELD