Hot water, Technical data – LELIT PL60 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Engh'sh
Hot water:
24.
25.
26.
27.
Check that the
tank cont^ns
water.
ATTENTION: the i^ernal tank has a special floating device
that controls the water
level. In case of lack of water, the water missing pot light (17) comes on automaically and at the same time the sound
aarm buzzes. Please fl the water tank Wth water (as descritied under Parting the machine, points 3-5): this Mil shut
of the
pot light (17) and the buzzer, confirming that the water level is suitable. NB: the water tank must be fed
in
wth water tl the MAX level indicated on the appance body.
Wat till the coffee ready pot light (4) comes on.
Place a mug under the hot water faucet (11) and press the hot water switch (20) up: the pot light (21) confirms the
sarflng. Once you get the desired amount of hot water press the switch (20) down to sop dispensing.
After having taken hot
water,
always check that there is
stNI
water
m the
tank
and
if
it is necessary, f the water tank
as indicated at point 24.
ROUTINE MAINTENANCE AND PRECAUTIONS:
- Clean up the seam tube (10) after every use.
-
Use a normal damp doth to dean the machine.
-
Do not leave the machine outdoors.
-
Do not immerse the machine in water.
-
Use the machine onlyi under adult control and keep it away from chNdren's reach.
-
Do not wash fers and fer hdder in the dishwasher.
-
During normal funcfloning some parts of the appance
body can reach high temperatures: pease handle wth due
caution!
ATTENTION: the machine is equipped wth a water tank of 2.71 wth missing water sensor connected to an farm pot light
(17) and also to a buzzer. The sound of the buzzer caused by the lack of water at sartng the machine is different from the
sound made to indicate
the
lack of water during
normal funtioning. The
restoration of the suftable water
revel
wil shut of
te aarm pot light (17) and te buzzer. If the water flnishes during te normal funtioning the missing water sensor wil
aow 15sec. of time to flnish the coffee; once the coffee is done the water tank must be fed wth water till the max level
indicated on the appance body.
We suggest reading the instrucflon booklet carefully and checking the water level in the water tank regularl'/.
Water softener included %nsered on the ^astic tube, inside the water tank): one way water softener for espresso
machines. It proects
the machine from limestone residues. It needs to be replaced
accordng to the water hardness and
consumpion foNowing te below table:
Water hardness
Quantity
10°F
90 It
20°F
45 It
27°F
35 It
35°F
23 It
45°F
20 It
NB: I's
is
necessary
to
replace the
resin
f er as indicated above otherwise
the
limestone residues
can
damage the coffee
machine (the warranty does not cover this type of damage).
Technical data:
Power suppl'y: 220-2304: 50Hz - 220-2304: 60Hz
Cofee heating dement: 1000W
^eam heating Sement: 1200W
Cofee pump pressure: 12/15 bar
Pump on coffee boNer (ULKA): 48W -- Pump on seam boNer (ULKA): 21W
WOer tank capacity: 2,7 litri
Cofee boMe r capacity: 250 ml - ^eam boNe r capacity: 400 ml
Dmensions (HxLxP): 30x30x42 cm - Net Weight: 10,5 kg
To be operaed wth ground coffee or coffee pods