Daewoo DF-8100P - Manual (Page 16)

SETUP
29 28
Initial Setup
Virtual Surround
You can enjoy a simulated 3D effect from two speakers by setting Virtual
Surround to On.
Follow the same procedure as ‘Digital Output‘ to set the ‘Virtual
Surround’ option.
Audio
Digital Output Off
Dynamic Range Off
Virtual Surround Off
Instructions
Enter-Confirm Setup-Exit Move …†
Select Virtual
Surround
Off
On
Follow the same procedure as ‘Video’ Settings to select ‘Audio’ Settings.
Digital Output
1
Use […/†] to select ‘Digital Output‘ while the ‘Audio’ submenu is
displayed.
2
Press [ENTER] or [√] to go to the second level.
3 Use […/†] to select the desired digital output type.
4 Press [ENTER] to confirm your selection.
5 Press [SETUP] to exit the menu.
Off
No signal will be output from the Digital Audio Out jacks.
LPCM
Select when connected to a 2 channel digital stereo amplifier. The DVD
Recorder+VCR's digital audio signal will be output in the PCM 2ch format
when you play a DVD (or VHS tape) recorded with a Dolby Digital (only for DVD) or MPEG soundtrack. If the DVD
is recorded with a DTS sound track then no sound will be heard.
Bitstream
Select when connected to a Dolby Digital or DTS decoder (or an amplifier or other equipment with a Dolby
Digital or DTS decoder).
Initial Setup
Audio
Digital Output Off
Dynamic Range Off
Virtual Surround Off
Instructions
Enter-Confirm Setup-Exit Move …†
Select Digital
Output
Off
Bitstream
LPCM
PREFERENCES / Audio Settings
Preferences
Video
Audio
Parental Controls
Auto Settings
VCR
Instructions
Enter-Confirm Setup-Exit
Move …†
Dynamic Range
While watching DVD movies, you may wish to compress the dynamic
range of the audio output (the difference between the loudest and
quietest passages). This allows you to listen to a movie at a lower
volume without losing clarity of sound. Set ‘Dynamic Range‘ to Low or
High for this effect.
Follow the same procedure as ‘Digital Output‘ to set the ‘Dynamic
Range’. Audio
Digital Output Off
Dynamic Range Off
Virtual Surround Off
Instructions
Enter-Confirm Setup-Exit Move …†
Select Dynamic
Range
Off
Low
High
Set Parental Level
The Parental Controls feature allows you to prevent DVDs from being played
based on their ratings or to have certain discs played with alternative scenes.
You can set the parental level from ‘ADULT’ to ‘KIDS’.
1
Press [SETUP].
2
Use [œ/√] to select ‘Preferences‘.
3 While ‘Preferences‘ is selected, press [†] to select ‘Parental Controls‘. And
press [ENTER].
4 Use […/†] to select ‘Set Parental Level’ and press [ENTER]. The Password
Input dialog will appear. Enter a 4-digit password using the [0-9] buttons. If
this is the first time you have entered a password, you will be prompted to
enter the password again to confirm it.
5 After setting the password, press [ENTER] while 'Set Parental Level' is
displayed.
6 Enter your new password.
7
Use […/†] to select the desired parental level and press [ENTER] to
confirm.
Off : If you select Unlock, the Lock feature is not active. All discs will play in
full.
ADULT to KIDS: Some discs contain scenes not suitable for children. If you
set a rating for the DVD Recorder+VCR, all scenes with the same rating or
lower will be played. Higher rated scenes will not be played unless an
alternative scene is available on the disc. The alternative must have the
same rating or a lower one. If no suitable alternative is found, playback will
stop. You must enter the 4-digit password or change the rating level in order to play the disc.
Preferences
Video
Audio
Parental Controls
Auto Settings
VCR
Instructions
Enter-Confirm Setup-Exit
Move …†
• The initial password is ‘0000‘. You must enter this password before you can
change the Parental Level.
• Set the new password to something other than '0000'.
Parental Control
Set Parental Level Off
Change Password
Set Parental Country Code
Instructions
Enter-Confirm Setup-Exit Move …†
Change Password
Current Code _ _ _ _
Enter New Code _ _ _ _
Confirm Code _ _ _ _
Instructions
Setup-Exit
PREFERENCES / Parental Controls
Password
Enter Password * * _ _
Instructions
Setup-Exit
Parental Control
Set Parental Level Off
Change Password
Set Parental Country Code
Instructions
Enter-Confirm Setup-Exit Move …†
Select the
parental level
Off
ADULT
NC-17