Directed Electronics A1200/4 - Manual (Page 4)

FEATURES
Advanced Instrumentation Input Stage
TC-X Crossover 24dB/Octave; HP/LP/FULL; 30-4kHz Crossover
Adaptive PWM Power Supply
AP-IV Protection Circuity
Fully Complementary Darlington Output Stage
QBASS TM Bass Boost (A600/4)
QBASS Plus TM Bass Boost (A1200/4)
High Voltage Input Capability with -12dB Attenuation Switch
Gold Plated RCA Input and Output Connectors
PowerLock TM Speaker and Power Wire Connectors
Mixed Mono/Stereo Operation
WHAT’S INCLUDED
Amplifier (with speaker and power plugs mounted)
(4) Mounting screws and washers
2mm hex wrench
2.5mm hex wrench
3mm hex wrench
CEA SPECIFICATIONS
3
AA660000//44
Power Output: 50 Watts RMS x 4 at 4 ohms and < 1% THD+N
Signal to Noise Ratio: -87 dBA (reference 1 Watt into 4 ohms)
Additional Power Output: 80 Watts RMS x 4 at 2 ohm at 14.4 Supply<1% THD+N
AA11220000//44
Power Output: 110 Watts RMS x 4 at 4 ohms and < 1% THD+N
Signal to Noise Ratio: -94 dBA (reference 1 Watt into 4 ohms)
Additional Power Output: 140 Watts RMS x 4 at 2 ohm at 14.4 Supply<1% THD+N