beautypg.com

Dustbag full indicator, Changing the filters (fig. 7), Using the cleaner head vario 4000 (fig.11) – AEG VAMPYRETTE 330 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Power economy button and

electronic suction control

(depending on model)

The VAMPYRETTE incorporates a high-per­

formance biower. The suction power can be
eiectronicaiiy controiled from MiN to MAX by

means of a slide.

Fig. 6/B: The power economy button ensures

that your vacuum cleaner has the right degree

of suction for normal everyday cleaning tasks.
Should, however, more intensive vacuum

cleaning be required (removing heavy dirt
stains, working on smooth floors, etc.), the
degree of suction can be increased to MAX.

in exactly the same manner, the suction power

can also be reduced to MIN (for delicate
fabrics, light carpets, etc.).

I should basically be noted that the highest

suction power setting will give the best
cleaning results. With increasing wattage,

however, the power consumption also
increases together with the effort required to
push the nozzles and the operating noise of

the vacuum cleaner.

Dustbag full indicator

(depending on model)

The filter change (bag full) indicator (fig. 1/H)
tells you that the filters must be changed.
You should then check as follcws:

Switch on vacuum cleaner.

VAMPYRETTE; set to MAX.

If a red symbol in the inspection window

show red, the dustbag or aiso tiie

MICROFILTER must be changed.

Please use original AEG dustbags or
MICROFILTERS provided with the

quality seal. This will ensure

high suction power and reliability.
Replacement filters (size 20) are available from

your stockist under E-No. 618 899 679 and

from the AEG After-Sales Service under

ET-No. 668 901 257, OKO-VAMPYRETTE/350

(size 27) E-No. 618899691,
ET-No. 668901 267. Damage resulting from

use of other dustbags will not be covered by

guarantee. Every pack of original AEG paper

filters contains: 10 dustbags and

2 MICROFILTERS.

Changing the filters (fig. 7)

Open the dust compartment lid by depressing

the snapaction catch and remove the lid.

Fig. 8: The lid can be used to carry the full
dustbag. Take out the full dustbag and fit the .

new dustbag on the dustbag carrier. Wipe the

dustbag cavity with a damp cloth as and when

required. Full dustbags can be disposed of

with the normal household rubbish.

Fig. 9: Please note: after every fifth dustbag

change, the MICROFILTER must also be

replaced to ensure proper suction power.

Through timely replacement, you will ensure

optimum suction power and save yourseif

work.

Fig. 10: Insert the lid into the appliance and
press it firmly closed.

Using the cleaner head VARIO 4000
(fig.11)

The cleaner head is universally suitable for

everyday cleaning of carpets and hard floor­

ing, such as wooden parquet flooring, ceramio

tilling, linoleum etc. There is no need to

manually adjust the cleaner head to suit dif­

ferent floor types.
Four rollers, as well as 2 wheels at the back of

the cleaner head, give the VARIO 4000 ex­
tremely good manoeuvrability. Even sideways

movements are possible.

The rollers ensure a constant distance

between the floor and the underside of the

cleaner head. This allows even scratch prone

wooden flooring to be cleaned.

It additionally features a pivot that makes your
hand vacuum cleaner especially mobile.

Working under furniture is eased by lateral

rotation of the appliance.

Fig. 12: When the nozzle is insetted with rota­

tion through 180°, the VAMPYRETTE needs a
working height of only 19 cm.

What to do when the rollers and
wheels stort seizing up? (fig. 13)

Remove the hair or threads that have accumu­
lated around the rollers, wheels and axles of

the cleaner head.

11

This manual is related to the following products: