Dukane 28A8753 User Manual

Page 33

System menu

Turn the features in the System menu on and off by highlighting
them and pressing

Source/Select

. A checkmark in the box indi-

cates the feature is on; an empty box means the feature is off.

IGURE

System menu

• Ceiling

: This turns the image upside down for ceiling-mounted

projection.

• Rear

: This reverses the image so you can project from behind a

translucent screen.

• SourceSearch

: When this feature is on, the projector automati-

cally searches for an active source. When it is off, you must
press the

Source/Select

button on the keypad or the

Computer

Video

button on the remote to switch among sources.

• Hide OSD

: This hides the on-screen display (OSD).

• DPMS enable

: This turns the Display Power Management Sys-

tem (DPMS) on. When it is on, the projector turns the lamp off
after 3 minutes of not detecting an active source. The projector
will return to normal activity immediately if it detects an active
source. After 5 additional minutes, the projector turns com-
pletely off. You must press the Power button to turn the projec-
tor back on. The LED blinks green when in DPMS mode.

• PnP enable

: This turns the plug and play feature on and off.

When it is On, most new computers will automatically recog-
nize the projector, then set the monitor resolution and refresh
rate accordingly. You need to set the Plug and Play setting to
Off for the projector to display properly on some older comput-
ers.

This manual is related to the following products:

28A8043